Struggling with a Lori single cylinder deadbolt?

https://mrlocksmith.com/

Mr. Locksmith explains how to rekey a Lori single cylinder deadbolt, a common and often confusing task for locksmiths. He details the steps involved, highlighting the need to use a long Allen wrench to remove the mortise cylinder set screw. Terry cautions viewers about common issues like rusted or stripped set screws and advises against using Loctite. He also mentions that despite these locks being widely used, he does not recommend them due to better alternatives.

How to Remove a Lori Single Cylinder Deadbolt: A Comprehensive Guide
Removing a Lori single cylinder deadbolt can be a perplexing task, even for seasoned locksmiths. Here’s a detailed step-by-step guide to help you navigate through the process. This guide is based on the insights shared by Terry from Mr. Locksmith™.
Introduction

Here’s what to look for:
Single Cylinder Design: Key on the outside and thumb turn on the inside.
Various Names: Lori, Kaba, or Ilco—different names often appear on the packaging.Step-by-StepRemoval Process

Removing the Screws and Plate
Initial Steps: Start by removing the two visible screws. Normally, this seems straightforward, but here’s where it gets tricky.
Face Plate: Take apart the face plate on the strike plate to remove the cylinder.
Identify the LockType: Verify that you have a Lori/Kaba Ilco single cylinder deadbolt.

Using the Allen Key
Long Allen Key Needed: You need a long allen key or wrench. Insert it deeply to reach the set screw.
Loosening the Set Screw: Turn the set screw left to loosen it. You don’t need to remove it entirely—just loosen it enough.
Unscrewing the Mortise Cylinder

Take out the Key: Remove the key halfway and then unscrew the mortise cylinder.
Mortise Lock Components: You’ll see the mortise lock with an Adams Rite cam on the back. The set screw extends all the way to the back.

Final Check:
After tightening and testing, make sure to check for any final adjustments. If the lock operates smoothly, you’re almost done.

Common Issues
Rusted Set Screws: Weather exposure can cause the set screws to rust. This might require extra effort to remove them.
Rounded Set Screws: Using the wrong size Allen key can round out the set screw holes, making removal more difficult.
Loctite Problems:Some people use Loctite on the screws, which is not advisable.

Final Words of Caution
Avoid Excessive Force: Never use excessive force while reinstalling any components, especially with the Lori lock or similar Adams Rite aluminum storefronts.
Alternative Solutions: While the Lori single cylinder deadbolt can be practical, there are better, more reliable options available today.

Conclusion
Removing a Lori single cylinder deadbolt may seem daunting at first, but with the right tools and steps, it becomes manageable. Remember, it’s crucial to use a long reach Allen wrench and follow the steps carefully to avoid any potential issues.
I hope you found this guide helpful! If you run into any problems with these locks, remember it’s just a bit of a pain but not impossible to handle. For more locksmith tips, subscribe to my channel, visit my website, and check out my online locksmith training courses for different skill levels.
Good luck and have a great day!

Struggling with a Lori single cylinder deadbolt?
00:00 Introduction and Channel Promotion
00:10 Identifying the Problem with Single Cylinder Deadbolts
00:53 Disassembling the Deadbolt
01:39 Removing the Mortise Cylinder
03:27 Reassembling and Testing the Lock
05:13 Common Issues and Recommendations
06:27 Conclusion and Final Thoughts

#mrlocksmith #lorilock #becomealocksmith

For LOCKSMITH TRAINING go to:
https://www.mrlocksmithtraining.com

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS:

https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

email: Terry@mrlocksmith.com

Locksmith Courses: http://mrlocksmithtraining.com/

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in the description are affiliate links. My videos are for educational purposes only. Information is subject to change/updates at any time.

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.